Differences

This shows you the differences between two versions of the page.

--- din-exp [2025/07/31 09:16] – created ok1hra
+++ din-exp [2025/08/31 12:38] (current) – [Interfaces] ok1hra
@@ Line 5: / Line 5: @@
 ===== Interfaces =====
 | Front view | pinout |
-| {{https://remoteqth.com/img/wiki-din-module-SB-01.png}} | 1 - from 12 to 24V DC from PWR input \\ 2 - **open colector 500mA Stykac2 with 10k pull-up** \\ 3 - from 12 to 24V DC from PWR input \\ 4 - **open colector 500mA Stykac1 with 10k pull-up** \\ 5 - from 12 to 24V DC from PWR input \\ 6 - **open colector 500mA SSR with 10k pull-up** \\ 7 - **RS485-A** \\ 8 - **RS485-B** |
+| {{https://remoteqth.com/img/wiki-din-module-SB-15.png}} | 1 - **11-13.8V / 1A max** DC PWR input \\ 2 - GND |
-| {{https://remoteqth.com/img/wiki-din-module-SB-02.png}} | **2 - input power from 12 to 24V DC/1A** \\ 1 - GND |
+| {{https://remoteqth.com/img/wiki-din-module-SB-04.png}} | 2x JST 1-wire for DS18B20 thesrnistor \\ **1 -** +3,3V  / max 500mA \\ **2 -** 1-wire bus (Gpio15) \\ **3 -** GND|
-| {{https://remoteqth.com/img/wiki-din-module-SB-03.png}} | SMA female \\ 2,4G WiFi antenna connector |
+| {{https://remoteqth.com/img/wiki-din-module-SB-02.png}} | **2 - RS485-A \\ 1 - RS485-B** |
-| Five LEDs | **RED -** fail fuse \\ **RED -** SSR \\ **RED -** STYKAC1 \\ **RED -** STYKAC2 \\ **GREEN -** Power |
+| Four LEDs | RED -** fail fuse** \\ GRN -** ETH 100M** \\ GRN -** ETH ACT** \\ GRN -** Power** |
 | {{https://remoteqth.com/img/wiki-din-module-SB-06.png}} | **USB-C serial** \\ +5V VBUS \\ **SBU1 -** 3V3 Gpio33 (I2C SDA) \\ **SBU2 -** 3V3 Gpio32 (I2C SCL) |
-| {{https://remoteqth.com/img/wiki-din-module-SB-04.png}} | JST 1-wire for DS18B20 thesrnistor \\ **1 -** +3,3V  / max 500mA \\ **2 -** 1-wire bus (Gpio15) \\ **3 -** GND|
 | {{https://remoteqth.com/img/wiki-din-module-SB-05.png}} | **1,2,3,6 -** Ethernet \\ **4+5 -** POE DC power input 12-24V/max 1A, any polarity \\ **7+8 -** POE DC power input 12-24V/max 1A, any polarity \\ Green LED - 100M \\ Yelow LED - ACT |
+| GPIO |  |
 ===== BOM =====
-| 1x | {{https://remoteqth.com/img/wiki-din-module-SB-09.png?100}} **Power connector** | [[https://www.tme.eu/cz/details/tj0231530000g/rozpojitelne-svorkovnice/amphenol-anytek/]] |
+| 1x | {{https://remoteqth.com/img/wiki-din-module-SB-16.png?100}} \\ **DC Power connector 5,5/2,1mm** | [[https://www.tme.eu/cz/details/pc-2.1_5.5-14/konektory-dc/changzhou-dahua-imp-and-exp-group-co/vg18013a/]] |
-| 1x | {{https://remoteqth.com/img/wiki-din-module-SB-10.png?100}} **DS18B20 with JST conector** | [[https://www.laskakit.cz/en/dallas-ds18b20-digitalni-vodotesne-cidlo-teploty-3m/]] |
+| 2x | {{https://remoteqth.com/img/wiki-din-module-SB-10.png?100}} \\ **DS18B20 with JST conector** | [[https://www.laskakit.cz/en/dallas-ds18b20-digitalni-vodotesne-cidlo-teploty-3m/]] |
-| 1x | {{https://remoteqth.com/img/wiki-din-module-SB-11.png?100}} **WiFi antenna + 5cm UF.L pigtail** | [[https://www.hadex.cz/o856-antena-wifi-24ghz--pigtail-ufl-sma/?gQT=1]] |
+| 1x | {{https://remoteqth.com/img/wiki-din-module-SB-09.png?100}} **RS485 connector** | [[https://www.tme.eu/cz/details/tj0231530000g/rozpojitelne-svorkovnice/amphenol-anytek/]] |
 | 2x | {{https://remoteqth.com/img/wiki-din-module-SB-12.png?100}} **M3x10mm** | [[https://www.tme.eu/cz/details/b3x10_bn2844/srouby/bossard/1489380/]] |
 | 1x | {{https://remoteqth.com/img/wiki-din-module-SB-13.png?100}} **1A fuse** | [[https://www.tme.eu/cz/details/0218001.txp/pojistky-5x20mm-zpozdene/littelfuse/]] |
 | 30g | {{https://remoteqth.com/img/wiki-din-module-SB-14.png?100}} **fillament PETG-V0** \\ [[https://iq.ul.com/ul/cert.aspx?ULID=104636411|UL94-V0 UL certificate IEC 60695-11-10]] | [[https://www.prusa3d.com/cs/produkt/prusament-petg-v0-natural-1kg/]] |
+| 1x | 3D print model | [[https://www.printables.com/model/1386414-arduino-esp32-ethernet-din-module]] |
-===== 3D model =====
-{{https://remoteqth.com/img/wiki-din-module-SB-07.png?300}} \\
-{{https://remoteqth.com/img/3d-glasses.png}} [[https://remoteqth.com/3d/loader.html?ETH32POE-DIN-module-SB.stl|3D preview]]
-    * [[https://remoteqth.com/3d/ETH32POE-DIN-module-SB.3mf|Download .3mf]] | rev 0.1
-    * [[https://remoteqth.com/3d/ETH32POE-DIN-module-SB.stl|Download .stl]] | rev 0.1
 ===== Firmware =====
-[[https://github.com/ok1hra/eth-din-dev-kit|For testing, on GitHub]]\\
+[[https://github.com/ok1hra/eth-din-dev-kit|GitHub]]\\
-===== Other =====
-    * [[https://remoteqth.com/hw/ESP32-WROOM-32U_CE_Certification.pdf|CE]]
-    * [[https://remoteqth.com/hw/Espressif_Systems_B2006164_RED_Appendix_Final.pdf|RED]]