Differences

This shows you the differences between two versions of the page.

--- eth32poe [2021/02/14 20:16] – created ok1hra
+++ eth32poe [2021/05/15 20:50] (current) – ok1hra
@@ Line 1: / Line 1: @@
-====== ESP32 pocket e-ink ======
+====== ESP32POE ======
-**(Development version)**
+Simple ethernet module based on ESP32, and powered from passive POE
+{{https://remoteqth.com/img/wiki-ETH32POE-03.png?800}}
 ----
-{{https://remoteqth.com/img/wiki-esp32-eink-02.png?800}}
-  * **Pocket** design with **LiPo battery**
+{{ https://remoteqth.com/img/wiki-ETH32POE-04.png?300}}
-  * 1,54 inch **200x200px e-ink**
+===== Source =====
-  * **Three butons** with wake up function
-  * Micro **USB** for external **power** and firmware upload
+  * [[https://remoteqth.com/hw/ETH32POE-03.pdf|.PDF schematics]]
-  * Measure circuit
+  * [[https://remoteqth.com/hw/ETH32POE-03-ibom.html|Interactive BOM]]
-  * ESP32 with WiFi connectivity
+  * [[https://remoteqth.com/hw/ETH32POE-03.step|.STEP 3D model]]
+  * [[https://remoteqth.com/download-count.php?Down=hw/ETH32POE-03.zip|.zip KiCad source code]]
+  * [[https://remoteqth.com/download-count.php?Down=3d/ETH32POE-3.zip|.zip parametric 3D print BOX (OpenScad + .STL)]] - if you want to see the internal LED, use a transparent filament
 ----
-{{ https://remoteqth.com/img/wiki-esp32-eink-03.png?300}}
+{{ https://remoteqth.com/img/POE-injector-01.png?300}}
+====== POE injector ======
 ===== Source =====
-  * [[https://remoteqth.com/hw/esp32-eink-02.pdf|.PDF schematics]]
+  * [[https://remoteqth.com/hw/POE-injector-01.pdf|.PDF schematics]]
-  * [[https://remoteqth.com/hw/esp32-eink-02-ibom.html|Interactive BOM]]
+  * [[https://remoteqth.com/hw/POE-injector-01-ibom.html|Interactive BOM]]
-  * [[https://remoteqth.com/hw/esp32-eink-02.step|.STEP 3D model]]
+  * [[https://remoteqth.com/hw/POE-injector-01.step|.STEP 3D model]]
-  * [[https://remoteqth.com/download-count.php?Down=hw/esp32-eink-02.zip|.zip KiCad source code]]
-  * [[https://remoteqth.com/3d/esp32-eink-01.zip|.zip 3D model source and .stl for case]]
 \\