Differences

This shows you the differences between two versions of the page.

--- rotating_mast_concept [2023/10/04 18:21] – ok1hra
+++ rotating_mast_concept [2023/10/05 21:34] (current) – [Tier part] ok1hra
@@ Line 4: / Line 4: @@
   - fixing to the ground using two ground screws
   - rotator attached at the base of the mast without axial load
-  - used aluminum **[[https://www.ehlinik.cz/hlinikova-trubka-60x2/pro-O3T0000101.html|tube with a diameter of 60x2mm,]]** with a connecting **[[https://www.ehlinik.cz/hlinikova-trubka-55x2-5/pro-0TS0000101.html|tube with a size of 55x2.5mm]]**
+  - designed for [[3d-print-rotator]]
-  - used tapered roller bearings **[[https://www.vkloziska.cz/30212-a-47904#zalozka=detail_parametry|30212]]** with an internal dimension of 60 mm
+{{https://remoteqth.com/img/wiki-mast-preview.png?600}} \\
-===== BOM (bottom part) =====
+{{https://remoteqth.com/img/wiki-3d-rot1-54.jpg?330}} {{https://remoteqth.com/img/wiki-3d-rot1-55.jpg?200}}
+===== BOM =====
 You can use **3D printing to order,** for example at **[[https://mirex3d.cz/kontakty/|mirex3d.cz]].**
+==== Mast tube ====
 | {{https://remoteqth.com/img/wiki-mast-02.png?100}} | Aluminum **[[https://www.ehlinik.cz/hlinikova-trubka-60x2/pro-O3T0000101.html|tube with a diameter of 60x2mm,]]** \\ according to the height of the mast | > 6m |
 | {{https://remoteqth.com/img/wiki-mast-02.png?100}} | Aluminum **[[https://www.ehlinik.cz/hlinikova-trubka-55x2-5/pro-0TS0000101.html|tube with a size of 55x2.5mm]]** \\ for connecting pipes with a larger diameter and connecting bearings | One meter \\ per joint |
-| {{https://remoteqth.com/img/wiki-mast-01.png?100}} | Bearings **[[https://www.vkloziska.cz/30212-a-47904#zalozka=detail_parametry|30212]]** | 1 piece |
+==== Bottom part ====
+| {{https://remoteqth.com/img/wiki-mast-01.png?100}} | Bearings **[[https://www.vkloziska.cz/30212-a-47904#zalozka=detail_parametry|30212]]** | 1 piece for the \\ foot of the mast. |
 | {{https://remoteqth.com/img/wiki-mast-03.png?100}} | rotating-mast-top-XL.dxf \\ Lasered stainless steel plate with a thickness of 6 mm  \\ **You can order online at [[https://www.idilna.cz/|idilna.cz]]** | 1 piece |
 | {{https://remoteqth.com/img/wiki-mast-04.png?100}} | rotating-mast-LR.dxf \\ Left and right support of the upper part \\ Lasered stainless steel plate with a thickness of 6 mm  \\ **You can order online at [[https://www.idilna.cz/|idilna.cz]]** | 2 pieces |
@@ Line 21: / Line 24: @@
 | {{https://remoteqth.com/img/wiki-mast-08.png?100}} | rotating-mast-02.stl \\ 3D printed part protects the bearing against rain and is defined between the bearing, the inner tube and the upper stainless ring \\ \\ 3D printed part made of PETG material | 1 piece |
 | {{https://remoteqth.com/img/wiki-mast-10.png?100}} | rotating-mast-09.stl \\  \\ \\ 3D printed part made of PETG material | 1 piece |
-| {{https://remoteqth.com/img/wiki-mast-11.png?100}} | rotating-mast-11.stl \\ Optional \\ \\ 3D printed part made of PETG material | 2 piece |
+==== Isolator optional part ====
+| {{https://remoteqth.com/img/wiki-mast-02.png?100}} | Aluminum **[[https://www.ehlinik.cz/hlinikova-trubka-20x2/pro-8TS0000101.html|tube with a size of 20x2mm]]** \\ **Optional** | One meter |
+| {{https://remoteqth.com/img/wiki-mast-12.png?100}} | rotating-mast-10.stl \\ **Optional** \\ \\ 3D printed part made of PETG material | 1 piece |
+| {{https://remoteqth.com/img/wiki-mast-11.png?100}} | rotating-mast-11.stl \\ **Optional** \\ \\ 3D printed part made of PETG material | 2 piece |
+==== Tier part ====
+| {{https://remoteqth.com/img/wiki-mast-01.png?100}} | Bearings **[[https://www.vkloziska.cz/30212-a-47904#zalozka=detail_parametry|30212]]** | one for each \\ tier of anchors. |
 | {{https://remoteqth.com/img/wiki-mast-19.png?100}} | rotating-mast-RingTop.dxf \\ The lower tube holder for the rotator to keep the tube in the axis during the folding of the mast \\ Lasered stainless steel plate with a thickness of 2 mm  \\ **You can order online at [[https://www.idilna.cz/|idilna.cz]]** | 1 piece |
 | {{https://remoteqth.com/img/wiki-mast-20.png?100}} | rotating-mast-TopMountpoint.dxf \\ The lower tube holder for the rotator to keep the tube in the axis during the folding of the mast \\ Lasered stainless steel plate with a thickness of 2 mm  \\ **You can order online at [[https://www.idilna.cz/|idilna.cz]]** | 1 piece |
-| {{https://remoteqth.com/img/wiki-mast-12.png?100}} | rotating-mast-10.stl \\ Optional \\ \\ 3D printed part made of PETG material | 1 piece |
 | {{https://remoteqth.com/img/wiki-mast-13.png?100}} | rotating-mast-04.stl \\  \\ \\ 3D printed part made of PETG material | 1 piece |
 | {{https://remoteqth.com/img/wiki-mast-14.png?100}} | rotating-mast-05.stl \\  \\ \\ 3D printed part made of PETG material | 1 piece |
 | {{https://remoteqth.com/img/wiki-mast-15.png?100}} | rotating-mast-03.stl \\  \\ \\ 3D printed part made of PETG material | 1 piece |
 | {{https://remoteqth.com/img/wiki-mast-16.png?100}} | rotating-mast-06.stl \\  \\ \\ 3D printed part made of PETG material | 2 piece |
-| {{https://remoteqth.com/img/wiki-mast-17.png?100}} | rotating-mast-08.stl \\  \\ \\ 3D printed part made of PETG material | 1 piece |
+| {{https://remoteqth.com/img/wiki-mast-17.png?100}} | rotating-mast-08.stl \\ Plug for finishing the upper end of the mast \\ \\ 3D printed part made of PETG material | 1 piece |
-| {{https://remoteqth.com/img/wiki-mast-18.png?100}} | rotating-mast-07.stl \\  \\ \\ 3D printed part made of PETG material | 1 piece |