RemoteQTH

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== RX splitter ======
----
{{https://remoteqth.com/img/wiki-rx-splitter-0.3-02.jpg?800}} \\
{{https://remoteqth.com/img/wiki-rx-splitter-0.3-03.jpg?440}}
{{https://remoteqth.com/img/wiki-rx-splitter-0.3-05.jpg?360}}


{{ https://remoteqth.com/img/wiki-rx-splitter-0.3-04.jpg?200}}

  * **Split RX** antenna to **TRX** and **SDR**
  * **Safe TRX,** if turn off, TRX and SDR is grounded
  * Bypass to **VNA** - ground if not use
  * **DC bias** current for eliminate relay resistance, indicated with LED
  * **12V DC power** spply
  * **3D print case** for mount to DIN rail

----
===== Source =====
  * [[https://remoteqth.com/hw/rx-splitter-0.3.pdf|.PDF schematics]]
  * [[https://remoteqth.com/hw/rx-splitter-0.3-ibom.html|Interactive BOM]]
  * [[https://remoteqth.com/hw/rx-splitter-0.3.step|.STEP 3D model]]
  * [[https://remoteqth.com/download-count.php?Down=hw/rx-splitter-0.3.zip|.zip KiCad source code]]
  * [[https://remoteqth.com/3d/rx-splitter-03.zip|.zip 3D model source and .stl for case]]
\\
{{https://remoteqth.com/img/wiki-rx-splitter-0.3.png?305}}
{{https://remoteqth.com/img/wiki-rx-splitter-0.3-01.png?400}}