====== Ethernet splitter +POE ======
----

{{https://remoteqth.com/img/wiki-ethernet-splitter-03.jpg}}\\
{{ https://remoteqth.com/img/wiki-ethernet-splitter-01.jpg?100}}
{{ https://remoteqth.com/img/wiki-ethernet-splitter-02.jpg?100}}\\

  * For **split/join two 100 Mbit ethernet**, to one UTP wire +POE (for use need two module)
  * **POE** terminal **transfer DC voltage** from one end to second
  * POE limitation **MAX 24V/640mA (15W)**
  * Both side center RJ45 **connetor LED**, show if POE is present
  * POE voltage and polarity **protect with fitration** common mode choke on both side
  * **ESD protection** with transient voltage suppressor
  * Ethernet is **galvanically isolated,** with insulation 2x 1,5 kV
  * Center single wire recomended use with **SFTP** cable (shield)
  * Two grounding potentials **GND** and **PE (Earth)** for center line

----
===== Source =====
  * [[https://remoteqth.com/hw/ethernet-splitter-01.pdf|.PDF schematics]]
  * [[https://remoteqth.com/hw/ethernet-splitter-01-ibom.html|Interactive BOM]]
  * [[https://remoteqth.com/hw/ethernet-splitter-01.step|.STEP 3D model]]
  * [[https://remoteqth.com/download-count.php?Down=hw/ethernet-splitter-01.zip|.zip KiCad source code]]
  * [[https://remoteqth.com/3d/ethernet-splitter-din-46mm.stl|.stl DIN rail mount 3D model for printer]]

{{https://remoteqth.com/img/ethernet-splitter-01-F.png?435}}
{{https://remoteqth.com/img/ethernet-splitter-01-B.png?400}} \\

\\