Differences

This shows you the differences between two versions of the page.

--- 3d_print_aprs_wx_station [2023/09/18 17:52] – [Web interface] ok1hra
+++ 3d_print_aprs_wx_station [2024/01/27 02:15] – [Source] ok1hra
@@ Line 13: / Line 13: @@
     * **[[https://github.com/ok1hra/3D-print-WX-station/tree/master/3d-print/stl-output|.STL and .3mf files]]**
     * **[[https://remoteqth.com/download-count.php?Down=hw/SimpleRotatorInterfaceV-POE.stl|.STL for POE]]** injector
+    * **[[https://www.printables.com/cs/model/714314-aprs-weather-station|Printables mirror]]**
   * **Electronics**
     * [[https://remoteqth.com/download-count.php?Down=hw/wx-08b.pdf|.PDF]] schematics rev 8.
@@ Line 18: / Line 19: @@
   * Optional **e-ink display**
     * [[https://github.com/ok1hra/esp32-e-ink|GitHub]]
+\\
+**Instaled stations** - [[https://aprs.fi/weather/a/OK1HRA-8|OK1HRA-8]] [[https://aprs.fi/weather/a/ok1kpa-6|OK1KPA-6]] [[https://aprs.fi/weather/a/OK1IRG-6|OK1IRG-6]] [[https://aprs.fi/weather/a/OK1MKH-8|OK1MKH-8]]\\
+\\
 ----
-===== Measures values ======
-  - **Temperature** (inside not exactly), external in sunshield
-  - **Relative humidity**
-  - **Dew point** calculated
-  - **Pressure**
-  - **Wind speed** - with three blades
-  - **Wind direction**
-  - **Rain** with a resolution of 0.14 mm
-{{https://remoteqth.com/img/wiki-wx-station2-complete3.jpg}}
 ===== Features ======
+{{https://remoteqth.com/img/wiki-wx-station2-complete3.jpg}} \\
 {{ https://remoteqth.com/img/wiki-wx-station2-78.jpg?300}}
+  - Measures values
+    - **Temperature** (inside not exactly), external in sunshield
+    - **Relative humidity**
+    - **Dew point** calculated
+    - **Pressure**
+    - **Wind speed** - with three blades
+    - **Wind direction**
+    - **Rain** with a resolution of 0.14 mm
   - **Ethernet** RJ45 connection
   - Powered via passive **POE** with own adapter
@@ Line 206: / Line 209: @@
     - **BMP280** - sensor values (pressure in square brackets converted to sea level)
     - **DS18B20** - sensor value
-  - Menu \\ //Used to set the necessary values. Press the letter from the left column to call up the required menu//
+  - SETTINGS \\ //Used to set the necessary values. Press the letter from the left column to call up the required menu//
 ----