Differences

This shows you the differences between two versions of the page.

--- 3d_print_aprs_wx_station [2023/09/23 11:02] – [Setup] ok1hra
+++ 3d_print_aprs_wx_station [2024/01/27 02:15] – [Source] ok1hra
@@ Line 13: / Line 13: @@
     * **[[https://github.com/ok1hra/3D-print-WX-station/tree/master/3d-print/stl-output|.STL and .3mf files]]**
     * **[[https://remoteqth.com/download-count.php?Down=hw/SimpleRotatorInterfaceV-POE.stl|.STL for POE]]** injector
+    * **[[https://www.printables.com/cs/model/714314-aprs-weather-station|Printables mirror]]**
   * **Electronics**
     * [[https://remoteqth.com/download-count.php?Down=hw/wx-08b.pdf|.PDF]] schematics rev 8.
@@ Line 18: / Line 19: @@
   * Optional **e-ink display**
     * [[https://github.com/ok1hra/esp32-e-ink|GitHub]]
+\\
+**Instaled stations** - [[https://aprs.fi/weather/a/OK1HRA-8|OK1HRA-8]] [[https://aprs.fi/weather/a/ok1kpa-6|OK1KPA-6]] [[https://aprs.fi/weather/a/OK1IRG-6|OK1IRG-6]] [[https://aprs.fi/weather/a/OK1MKH-8|OK1MKH-8]]\\
+\\
 ----