rotating_mast_concept
This is an old revision of the document!
Rotating mast concept (release 2023)
Mast concept fully rotatable, with functions
- the mast is foldable with its axis on the ground
- fixing to the ground using two ground screws
- rotator attached at the base of the mast without axial load
- used aluminum tube with a diameter of 60x2mm, with a connecting tube with a size of 55x2.5mm
- used tapered roller bearings 30212 with an internal dimension of 60 mm
BOM (bottom part)
You can use 3D printing to order, for example at mirex3d.cz.
Aluminum tube with a diameter of 60x2mm, according to the height of the mast | > 6m | |
Aluminum tube with a size of 55x2.5mm for connecting pipes with a larger diameter and connecting bearings | One meter per joint |
|
Bearings 30212 | 1 piece | |
rotating-mast-top-XL.dxf Lasered stainless steel plate with a thickness of 6 mm You can order online at idilna.cz | 1 piece | |
rotating-mast-LR.dxf Left and right support of the upper part Lasered stainless steel plate with a thickness of 6 mm You can order online at idilna.cz | 2 pieces | |
rotating-mast-fix.dxf The lower tube holder for the rotator to keep the tube in the axis during the folding of the mast Lasered stainless steel plate with a thickness of 2 mm You can order online at idilna.cz | 1 piece | |
rotating-mast-RingBottom.dxf A ring that distributes the weight of the mast on the bottom bearing Lasered stainless steel plate with a thickness of 2 mm You can order online at idilna.cz | 1 piece | |
rotating-mast-07.stl Part for connecting the upper and side part 3D printed part made of PETG material | 2 piece | |
rotating-mast-01.stl The bearing is placed on the top of the lasered part, fastened with ten screws M?x? 3D printed part made of PETG material | 1 piece | |
rotating-mast-02.stl 3D printed part protects the bearing against rain and is defined between the bearing, the inner tube and the upper stainless ring 3D printed part made of PETG material | 1 piece | |
rotating-mast-09.stl 3D printed part made of PETG material | 1 piece | |
rotating-mast-11.stl Optional 3D printed part made of PETG material | 2 piece | |
rotating-mast-10.stl Optional 3D printed part made of PETG material | 1 piece | |
rotating-mast-04.stl 3D printed part made of PETG material | 1 piece | |
rotating-mast-05.stl 3D printed part made of PETG material | 1 piece | |
rotating-mast-03.stl 3D printed part made of PETG material | 1 piece |
rotating_mast_concept.1696442481.txt.gz · Last modified: 2023/10/04 18:01 by ok1hra