Mast concept fully rotatable, with functions

1. the mast is foldable with its axis on the ground
2. fixing to the ground using two ground screws
3. rotator attached at the base of the mast without axial load
4. used aluminum tube with a diameter of 60x2mm, with a connecting tube with a size of 55x2.5mm
5. used tapered roller bearings 30212 with an internal dimension of 60 mm

You can use 3D printing to order, for example at mirex3d.cz.

	Aluminum tube with a diameter of 60x2mm, according to the height of the mast	> 6m
	Aluminum tube with a size of 55x2.5mm for connecting pipes with a larger diameter and connecting bearings	One meter per joint
	Bearings 30212	1 piece
	rotating-mast-top-XL.dxf Lasered stainless steel plate with a thickness of 6 mm You can order online at idilna.cz	1 piece
	rotating-mast-LR.dxf Left and right support of the upper part Lasered stainless steel plate with a thickness of 6 mm You can order online at idilna.cz	2 pieces
	rotating-mast-fix.dxf The lower tube holder for the rotator to keep the tube in the axis during the folding of the mast Lasered stainless steel plate with a thickness of 2 mm You can order online at idilna.cz	1 piece
	rotating-mast-RingBottom.dxf A ring that distributes the weight of the mast on the bottom bearing Lasered stainless steel plate with a thickness of 2 mm You can order online at idilna.cz	1 piece
	rotating-mast-07.stl Part for connecting the upper and side part 3D printed part made of PETG material	2 piece
	rotating-mast-01.stl The bearing is placed on the top of the lasered part, fastened with ten screws M?x? 3D printed part made of PETG material	1 piece
	rotating-mast-02.stl 3D printed part protects the bearing against rain and is defined between the bearing, the inner tube and the upper stainless ring 3D printed part made of PETG material	1 piece
	rotating-mast-09.stl 3D printed part made of PETG material	1 piece
	rotating-mast-RingTop.dxf The lower tube holder for the rotator to keep the tube in the axis during the folding of the mast Lasered stainless steel plate with a thickness of 2 mm You can order online at idilna.cz	1 piece
	rotating-mast-TopMountpoint.dxf The lower tube holder for the rotator to keep the tube in the axis during the folding of the mast Lasered stainless steel plate with a thickness of 2 mm You can order online at idilna.cz	1 piece
	Aluminum tube with a size of 20x2mm Optional	One meter
	rotating-mast-10.stl Optional 3D printed part made of PETG material	1 piece
	rotating-mast-11.stl Optional 3D printed part made of PETG material	2 piece
	rotating-mast-04.stl 3D printed part made of PETG material	1 piece
	rotating-mast-05.stl 3D printed part made of PETG material	1 piece
	rotating-mast-03.stl 3D printed part made of PETG material	1 piece
	rotating-mast-06.stl 3D printed part made of PETG material	2 piece
	rotating-mast-08.stl 3D printed part made of PETG material	1 piece
	rotating-mast-07.stl 3D printed part made of PETG material	1 piece