Differences

This shows you the differences between two versions of the page.

--- rx-splitter [2020/12/29 22:37] – ok1hra
+++ rx-splitter [2020/12/30 09:03] – ok1hra
@@ Line 1: / Line 1: @@
 ====== RX splitter ======
 ----
+{{https://remoteqth.com/img/wiki-rx-splitter-0.3-02.jpg?800}} \\
+{{https://remoteqth.com/img/wiki-rx-splitter-0.3-03.jpg?430}}
+{{https://remoteqth.com/img/wiki-rx-splitter-0.3-05.jpg?370}}
-  * Split RX antenna to TRX and SDR
+{{ https://remoteqth.com/img/wiki-rx-splitter-0.3-04.jpg?200}}
-  * Safe TRX, if turn off, TRX and SDR is grounded
-  * Bypass to VNA - ground if not use
+  * **Split RX** antenna to **TRX** and **SDR**
-  * DC bias current for eliminate relay resistance, indicated with LED
+  * **Safe TRX,** if turn off, TRX and SDR is grounded
-  * 12V DC power spply
+  * Bypass to **VNA** - ground if not use
-  * 3D print case for mount to DIN rail
+  * **DC bias** current for eliminate relay resistance, indicated with LED
+  * **12V DC power** spply
+  * **3D print case** for mount to DIN rail
 ----
@@ Line 16: / Line 21: @@
   * [[https://remoteqth.com/hw/rx-splitter-0.3.step|.STEP 3D model]]
   * [[https://remoteqth.com/download-count.php?Down=hw/rx-splitter-0.3.zip|.zip KiCad source code]]
-  * [[https://remoteqth.com/3d/ethernet-splitter-din-46mm.stl|.stl DIN rail mount 3D model for printer]]
+  * [[https://remoteqth.com/3d/rx-splitter-03.zip|.zip 3D model source and .stl for case]]
 \\
+{{https://remoteqth.com/img/wiki-rx-splitter-0.3.png?305}}
+{{https://remoteqth.com/img/wiki-rx-splitter-0.3-01.png?400}}