7ANT Controller

B I U S link image code list	Show page   Syntax
!RX ANT WAY switch * There are two ways how to connect your RX antenna controller to your TRX (RX). ** 1. Using RX antenna port on your TRX. [Example|https://remoteqth.com/img/ZAW-WIKI/k9-bidir-controller/cable_connecting_ext_trx.png] ** 2. Using TX ANT port on your TRX and switch antennas in the controller. [Example|https://remoteqth.com/img/ZAW-WIKI/k9-bidir-controller/rx_way_switching.png] Add 1: '''{.redka#id color: #f23f37; font-size: 200%}⚠{/} MUST be RX ANT ONLY PORT on TRX, no TX!!!''' [https://remoteqth.com/img/ZAW-WIKI/7ant/switch/controller_k9ay_4way_rx_way_switching_cable_connecting_850.jpg|noborder] * RX ANT IN and OUT on your TRX: [https://remoteqth.com/img/ZAW-WIKI/7ant/switch/controller_k9ay_4way_rx_way_switching_cable_connecting_RX_IN_OUT_850.jpg|noborder] Add 2: [https://remoteqth.com/img/ZAW-WIKI/7ant/switch/controller_k9ay_4way_rx_tx_way_switching_850.jpg|noborder] TX signal way during TXing: [https://remoteqth.com/img/ZAW-WIKI/7ant/switch/controller_k9ay_4way_rx_tx_way_switching_II_850.jpg|noborder] * You can use internal RX antenna switch. ** this is ideal for TRX without RX only antenna port ** also for the rest TRX for fast RX antenna switching ** switching between TX antenna and RX antenna * If you want to use this feature you MUST use PTT IN to control relay for TX antenna! * There is easy PTT loop on rear panel with two RCA connectors. ** PTTcontrol works only in sniffer mode. * PTT can continue to your PA over this box. ** also when the controler is OFF ** compatible with 5V PTT logic (as OM-power PAs) '''{.redka#id color: #f23f37; font-size: 200%}⚠{/} NOTE: PTT must be used!!!''' [https://remoteqth.com/img/ZAW-WIKI/7ant/switch/rx-way-switch-7ant_850.png|noborder] * RX SOURCE knob for fast switching of the RX way '''{.redka#id color: #f23f37; font-size: 200%}⚠{/} NOTE: RED LED TX must light ON when you TX PTT!!!''' [https://remoteqth.com/img/ZAW-WIKI/7ant/switch/rxway-850-1.jpg|noborder]
Password Summary of changes