Main page
Recent changes
IP Remote hardware Switch
B
I
U
S
link
image
code
list
Show page
Syntax
!Network setup Ethernet module can be configured from a win software, which you can download from our website [TCP232-T24|https://remoteqth.com/download-count.php?Down=sw/usr-tcp232-t24.zip], or directly from the [manufacturer.|https://www.usriot.com/usr-tcp232-t24-setup-v5-1-1-20/] !!Default configuration * '''Baudrate''' defines the speed at which communicates Arduino module - default '''9600'''. [https://remoteqth.com/img/wiki-ipsw-default-ip.png|noborder] This picture shows default settings ethernet module, similar settings will suffice for the local network, or VPN tunnels. Connect over the internet with a public IP address remote side, need change other IP settings, is depending on individual networks, public IP address and port redirected. The difference between using NAT and VPN tunel connection shows next picture. [https://remoteqth.com/img/wiki-ipsw-nat.png|noborder] !! Example setting connection via internet [https://remoteqth.com/img/wiki-ipsw-nat-ip.png|noborder]
Password
Summary of changes