RX antenna - Bi-directional 2-wire beverage ONE coax output

B I U S link image code list	Show page   Syntax
!!The drill drawing Paste the drawing on the box and fix it with some tape. [https://remoteqth.com/img/ZAW-WIKI/Bi-Dir_1out/1.jpg|noborder] [https://remoteqth.com/img/ZAW-WIKI/Bi-Dir_1out/2.jpg|noborder] [https://remoteqth.com/img/ZAW-WIKI/Bi-Dir_1out/3.jpg|noborder] Drill 3 or 3,2mm holes for connector. [https://remoteqth.com/img/ZAW-WIKI/Bi-Dir_1out/4.jpg|noborder] Drill 4mm holes for antenna screws. [https://remoteqth.com/img/ZAW-WIKI/Bi-Dir_1out/5.jpg|noborder] [https://remoteqth.com/img/ZAW-WIKI/Bi-Dir_1out/6.jpg|noborder] Bend the screw heads into box - use 6mm drill and do it slowly by hand - drill 16mm hole for connector [https://remoteqth.com/img/ZAW-WIKI/Bi-Dir_1out/7.jpg|noborder]
Password Summary of changes