Rotator module version 3.3

B I U S link image code list	Show page   Syntax
!!Assembly gallery [https://remoteqth.com/img/wiki-rot33-1.jpg] ✔ All components [https://remoteqth.com/img/wiki-rot33-2.jpg] ❏ Solder R4 R6 R7 R8 (marked in blue) [https://remoteqth.com/img/wiki-rot33-3.jpg] ❏ 13 and 9 pins 90° strip [https://remoteqth.com/img/wiki-rot21-3.jpg] ❏ 16 pins strip to LCD [https://remoteqth.com/img/wiki-rot30-4.jpg] ❏ Insulating spacer washers between LCD and PCB [https://remoteqth.com/img/wiki-rot33-4.jpg] ❏ LCD module to PCB [https://remoteqth.com/img/wiki-rot33-5.jpg] ❏ CW, CCW and START switch (marked in blue) and preset encoder, Now front panel is final [https://remoteqth.com/img/wiki-rot33-6.jpg] ❏ Next R1 R2 R3 R5 (marked in black) and R9 solder on main board [https://remoteqth.com/img/wiki-rot33-7.jpg] ❏ D1 D2 D3 D4 (marked in red) [https://remoteqth.com/img/wiki-rot33-8.jpg] ❏ L1 (marked in green) R9 (marked in red) [https://remoteqth.com/img/wiki-rot33-9.jpg] ❏ Q1 Q2 Q3 and Arduino socket [https://remoteqth.com/img/wiki-rot33-10.jpg] ❏ C1 C2 C3 C4 C5 and C6 [https://remoteqth.com/img/wiki-rot33-11.jpg] ❏ JP1 P6 CON1 [https://remoteqth.com/img/wiki-rot33-12.jpg] ❏ L2 RV1 [https://remoteqth.com/img/wiki-rot33-13.jpg] ❏ RL1 RL2 RL3 J1 [https://remoteqth.com/img/wiki-rot33-14.jpg] ❏ solder front panel via pin strip [https://remoteqth.com/img/wiki-rot33-15.jpg] [https://remoteqth.com/img/wiki-rot33-16.jpg] ❏ Last solder Arduino Nano pins [https://remoteqth.com/img/wiki-rot-case-8b.jpg] ❏ Plug Arduino Nano to socket U2 ❏ after power up, {.redka#id color: #f00;}'''preset LCD contrast'''{/} with potentiometer RV1
Password Summary of changes