Ser2Net

B I U S link image code list	Show page   Syntax
!Configure com ports Ser2Net page setting up to 8 RS232 or UART serial lines export to IP. Every USB interface must have a different serial number, to uniquely identify the server (recommended), or identify by relative device path - depends on the overall configuration of a USB hub, after change any part can be changed. After set this form you can repluged your usb device or reboot server, for detection new USB rotator interface. [https://remoteqth.com/img/wiki-ser2net-detect-usb-device-l.png|link=https://remoteqth.com/img/wiki-ser2net-detect-usb-device.png|right] The individual settings: * '''Number of COM's''' select up to eight ports, or disable. * '''Connected device name:''' can have maximum 25 characters. * '''Export on IP port:''' IP port com1 value must be from 101 to 65535. * '''Baudrate:''' ** 300 baud ** 1200 baud ** 2400 baud ** 4800 baud ** 9600 baud ** 19200 baud ** 38400 baud ** 57600 baud ** 115200 baud * '''Databits:''' ** 7 ** 8 * '''Stopbit:''' ** 1 ** 2 * '''Parity:''' ** Even ** Odd ** None *'''Detect device:''' For finding id's and serial numbers USB device you can use a pop-up window [https://remoteqth.com/img/split.png] . This window print dmesg message from kernel or list usb device path of system, After plug usb device you [see preview.|https://remoteqth.com/img/wiki-dmesg.png] '''[How to set usb device SerialNumber].''' **'''exactly by IDs (recommended) -''' connects devices that is able to clearly identify by ID and SN, typical FTDI chip. *** USB Vendor id: must have at 4 characters. *** USB Product id: must have at 4 characters. *** USB sn: must have at least 1 characters, and maximum 8 characters. **'''by relative Device path -''' connects devices that is not able to clearly identify, typical PL2303 chip. *** Device name: find and copy from pop-up window in format 'ttyUSB.#-#.(#|#-#).#'.
Password Summary of changes