Modular 7ANT RX switch

This revision is from 2019/05/11 22:45. You can Restore it.

<<- Web page

Quick Start Guide(Edit)

This is modular 7 RX antenna switch. It allows you tu use up to 7 independant RX antennas (beverages, Bi-dir beverages, RX loops etc.). You can use just one board for single RX output or up to three boards for three independant RX. Also ANT ports can be open or connected tu dummy load. There is 50 or 75 ohms one and also LC BPF isolation for that for multi stations and Bi-dir beverages with two outputs. You can use controller with BPFs and preamp, protections and RX way switching. Also two independant RX per band is possible with optional 7 ANT RX SPLITTER.

This is ideal solution for Single OP through SO2R to Multi-Multi, with up to 2 independant RX per band!

Applications(Edit)

  • RX antennas switch for Single / multi op DXing and contesting.
  • With the 7ANT RX splitter you can have TWO independant RX on each band!

USING(Edit)

  • NOTE: Every ANT port does have own splitter! You can switch splitters only on some ports! Without supply voltage there is only bypassfrom ANT to RX1 port!