Differences

This shows you the differences between two versions of the page.

--- 3d-print-rotator [2023/07/01 10:32] – ok1hra
+++ 3d-print-rotator [2026/05/29 16:42] (current) – [BOM] ok1hra
@@ Line 1: / Line 1: @@
+====== 3D print rotator (revision 2023) ======
-==== 3D print rotator (revision 2023) ====
 [[https://github.com/ok1hra/Parameterizable-3D-print-Antenna-rotator-in-OpenScad#m-size-recommended|Source files on GitHub]]\\
+[[https://www.printables.com/cs/model/714326-parameterizable-3d-print-antenna-rotator-in-opensc|Printables mirror]]\\
+\\
 I include the source file in OpenScad and several preset exports, in dimensions S, M, MS, XL.
 Size M is recommended, MS reduced for Prusa MK3 and MK4 printers. I also include the following data for each dimension:
@@ Line 9: / Line 10: @@
   * .STL files
   * .3mf preset
- \\
-Printed parts \\ {{https://remoteqth.com/img/wiki-3d-rot1-00.png}} \\
-=== BOM ===
+**It can be controlled via a web interface, using electronics [[simple_rotator_interface_v|Simple rotator interface V.]]** \\
+{{https://remoteqth.com/img/wiki-simple-rot-05.jpg?235}}{{https://remoteqth.com/img/wiki-simple-rot-06.png?250}} \\
+----
+===== Torque test M size =====
+{{https://raw.githubusercontent.com/ok1hra/Parameterizable-3D-print-Antenna-rotator-in-OpenScad/main/M-01.jpg?300}} {{youtube>XpkWt55Bdf4}} \\
+**Max torque 2200 kg/cm (215 N/m)** without destroy
+----
+===== Printed parts =====
+You can use **3D printing to order,** for example at **[[https://mirex3d.cz/kontakty/|mirex3d.cz]].** \\
+{{https://remoteqth.com/img/wiki-3d-rot1-00.png}} \\
+===== BOM =====
 | {{https://remoteqth.com/img/wiki-3d-rot1-00.png?100}} | Printed parts \\ Prefered black PETG filament | 13 pieces |
-| {{https://remoteqth.com/img/wiki-3d-rot1-64.jpg?100}} | Top cover 4mm thick from stainless steel \\ By .DXF file from [[https://github.com/ok1hra/Parameterizable-3D-print-Antenna-rotator-in-OpenScad#m-size-recommended|GitHub]] depending on the size | 1 piece |
+| {{https://remoteqth.com/img/wiki-3d-rot1-64.jpg?100}} | Top cover 4mm thick from stainless steel \\ By .DXF file from [[https://github.com/ok1hra/Parameterizable-3D-print-Antenna-rotator-in-OpenScad#m-size-recommended|GitHub]] depending on the size \\ \\ **You can order online at [[https://www.idilna.cz/|idilna.cz]]** | 1 piece |
 | {{https://remoteqth.com/img/wiki-3d-rot1-56.jpg?100}} | M3 x 6mm, allen head, stainless steel | 3 pieces |
 | {{https://remoteqth.com/img/wiki-3d-rot1-57.jpg?100}} | M3 x 10mm, allen head, stainless steel | 11 pieces |
@@ Line 26: / Line 42: @@
 | {{https://remoteqth.com/img/wiki-3d-rot1-68.png?100}} | Universal transparent silicone sealant | 100g |
 | {{https://remoteqth.com/img/wiki-3d-rot1-66.png?100}} | [[https://www.tme.eu/cz/details/3547s-1aa-102a/potenciometry-viceotackove-dratove/bourns/|Azimuth potentiometer Bourns 3547S-1AA-102A]] | 1 piece |
-| {{https://remoteqth.com/img/wiki-3d-rot1-67.png?100}} | Motor from PARKSIDE PBSA 12 D4 drill | 1 piece |
+| {{https://remoteqth.com/img/wiki-3d-rot1-67.png?100}} | Motor from PARKSIDE PBSA 12 D4 drill \\ From May 2026 availabe mount for motor rev F5, **TNX OK1GOD!**  | 1 piece |
 |  | 2x 1.5mm wires, 20 cm long | 1 piece |
 |  | 3x 1.5mm wires, 40 cm long | 1 piece |
@@ Line 33: / Line 49: @@
 | {{https://remoteqth.com/img/wiki-3d-rot1-77.png?100}} | 3D print box for Simple Rotator Interface V. electronics (optional) \\ Mounted in step 16 | 1 pieces |
-=== Tools ===
+===== Tools =====
 | {{https://remoteqth.com/img/wiki-3d-rot1-63.jpg?100}} | Drill 8,2mm |
 | {{https://remoteqth.com/img/wiki-3d-rot1-75.png?100}} | Drill machine |
@@ Line 50: / Line 66: @@
-==== Assembly manual, step by step ====
+====== Assembly manual, step by step ======
   - Before disassembly drill tool for extract motor, set the gear ratio to 1 (slow), and the torque to maximum (drill) {{https://remoteqth.com/img/wiki-3d-rot1-01.jpg?600}} \\
   - Remove the two U-shaped springs from the battery space \\ {{https://remoteqth.com/img/wiki-3d-rot1-02.jpg?300}} {{https://remoteqth.com/img/wiki-3d-rot1-03.jpg?300}} \\