Differences

This shows you the differences between two versions of the page.

--- 3d-print-rotator [2023/10/03 06:00] – [Torque test M size] ok1hra
+++ 3d-print-rotator [2024/01/17 20:21] (current) – [3D print rotator (revision 2023)] ok1hra
@@ Line 2: / Line 2: @@
 [[https://github.com/ok1hra/Parameterizable-3D-print-Antenna-rotator-in-OpenScad#m-size-recommended|Source files on GitHub]]\\
+[[https://www.printables.com/cs/model/714326-parameterizable-3d-print-antenna-rotator-in-opensc|Printables mirror]]\\
+\\
 I include the source file in OpenScad and several preset exports, in dimensions S, M, MS, XL.
 Size M is recommended, MS reduced for Prusa MK3 and MK4 printers. I also include the following data for each dimension:
@@ Line 8: / Line 10: @@
   * .STL files
   * .3mf preset
- \\
+**It can be controlled via a web interface, using electronics [[simple_rotator_interface_v|Simple rotator interface V.]]** \\
+{{https://remoteqth.com/img/wiki-simple-rot-05.jpg?235}}{{https://remoteqth.com/img/wiki-simple-rot-06.png?250}} \\
+----
 ===== Torque test M size =====
-{{youtube>XpkWt55Bdf4}} {{https://raw.githubusercontent.com/ok1hra/Parameterizable-3D-print-Antenna-rotator-in-OpenScad/main/M-01.jpg?250}} \\
+{{https://raw.githubusercontent.com/ok1hra/Parameterizable-3D-print-Antenna-rotator-in-OpenScad/main/M-01.jpg?300}} {{youtube>XpkWt55Bdf4}} \\
 **Max torque 2200 kg/cm (215 N/m)** without destroy
+----
 ===== Printed parts =====