Differences

This shows you the differences between two versions of the page.

--- 3d-print-rotator [2023/10/03 06:02] – [Torque test M size] ok1hra
+++ 3d-print-rotator [2026/05/29 16:42] (current) – [BOM] ok1hra
@@ Line 2: / Line 2: @@
 [[https://github.com/ok1hra/Parameterizable-3D-print-Antenna-rotator-in-OpenScad#m-size-recommended|Source files on GitHub]]\\
+[[https://www.printables.com/cs/model/714326-parameterizable-3d-print-antenna-rotator-in-opensc|Printables mirror]]\\
+\\
 I include the source file in OpenScad and several preset exports, in dimensions S, M, MS, XL.
 Size M is recommended, MS reduced for Prusa MK3 and MK4 printers. I also include the following data for each dimension:
@@ Line 8: / Line 10: @@
   * .STL files
   * .3mf preset
- \\
+**It can be controlled via a web interface, using electronics [[simple_rotator_interface_v|Simple rotator interface V.]]** \\
+{{https://remoteqth.com/img/wiki-simple-rot-05.jpg?235}}{{https://remoteqth.com/img/wiki-simple-rot-06.png?250}} \\
+----
 ===== Torque test M size =====
@@ Line 34: / Line 42: @@
 | {{https://remoteqth.com/img/wiki-3d-rot1-68.png?100}} | Universal transparent silicone sealant | 100g |
 | {{https://remoteqth.com/img/wiki-3d-rot1-66.png?100}} | [[https://www.tme.eu/cz/details/3547s-1aa-102a/potenciometry-viceotackove-dratove/bourns/|Azimuth potentiometer Bourns 3547S-1AA-102A]] | 1 piece |
-| {{https://remoteqth.com/img/wiki-3d-rot1-67.png?100}} | Motor from PARKSIDE PBSA 12 D4 drill | 1 piece |
+| {{https://remoteqth.com/img/wiki-3d-rot1-67.png?100}} | Motor from PARKSIDE PBSA 12 D4 drill \\ From May 2026 availabe mount for motor rev F5, **TNX OK1GOD!**  | 1 piece |
 |  | 2x 1.5mm wires, 20 cm long | 1 piece |
 |  | 3x 1.5mm wires, 40 cm long | 1 piece |