Differences

This shows you the differences between two versions of the page.

--- ci-v_mqtt_stepper [2025/08/20 16:42] – [Firmware (MQTT variant)] ok1hra
+++ ci-v_mqtt_stepper [2025/08/20 16:57] (current) – [Firmware (CI-V variant)] ok1hra
@@ Line 86: / Line 86: @@
   - Download **source** from [[https://github.com/ok1hra/CI-V_stepper|Github]] and compile in [[https://www.arduino.cc/en/Main/Software|IDE]]
       - Install [[https://www.arduino.cc/en/Guide/Libraries|EEPROM library]]
-  - Download **compiled binary** from [[https://github.com/ok1hra/CI-V_stepper/releases|release page]] and upload with some tool
+  <del>- Download **compiled binary** from [[https://github.com/ok1hra/CI-V_stepper/releases|release page]] and upload with some tool
-      - for example [[http://www.ladyada.net/learn/avr/avrdude.html|avrdude]] or [[http://xloader.russemotto.com/|Xloader]] for windows
+      - for example [[http://www.ladyada.net/learn/avr/avrdude.html|avrdude]] or [[http://xloader.russemotto.com/|Xloader]] for windows</del>
+    - upload via **ICSP programmer**
 === Firmware source ===
@@ Line 111: / Line 112: @@
 ==== Firmware (MQTT variant) ====
   * need install wiznet ethernet module
-  * use another firmware [[GitHub|https://github.com/ok1hra/MQTT-stepper]]
+  * use another firmware [[https://github.com/ok1hra/MQTT-stepper|GitHub]]
   * for setup and control see source code header