Differences

This shows you the differences between two versions of the page.

--- double_sun_shield_for_thermometer [2024/01/09 21:53] – ok1hra
+++ double_sun_shield_for_thermometer [2024/01/09 21:53] (current) – [3D print Double sun shield for thermometer DS18B20] ok1hra
@@ Line 4: / Line 4: @@
 **The doubling of the shield makes it possible to better shield the salve heat from the heated outer shield.**
-**[[https://github.com/ok1hra/3D-print-WX-station/tree/master/3d-print|Source files on GitHub]]**
+**[[https://github.com/ok1hra/3D-print-WX-station/tree/master/3d-print|Source files on GitHub]]** \\
-**[[https://www.printables.com/cs/model/714305-double-radiation-sun-shield-for-thermometer-ds18b2|Printables mirror]]**
+**[[https://www.printables.com/cs/model/714305-double-radiation-sun-shield-for-thermometer-ds18b2|Printables mirror]]** \\
   * I include the source file **sun-shield.scad** in OpenScad
   * **exported .STL** files for individual parts (preset for mounting rods with a diameter of 42 mm)