Differences

This shows you the differences between two versions of the page.

--- rotating_mast_concept [2024/07/24 21:49] – ok1hra
+++ rotating_mast_concept [2024/07/25 11:29] (current) – [BOM] ok1hra
@@ Line 1: / Line 1: @@
 ====== Rotating mast concept (release 2023) ======
 Mast concept fully rotatable, with functions
-  - the mast is foldable with its axis on the ground
+  - the mast is **foldable** with its axis on the ground
-  - fixing to the ground using two ground screws
+  - fixing to the ground using two **ground screws**
-  - rotator attached at the base of the mast without axial load
+  - the mast can be **[[https://www.printables.com/cs/model/728185-vertical-antenna-insulator|isolated]]** and used as a vertical antenna
-  - designed for [[3d-print-rotator]]
+  - **rotator** attached at the base of the mast without axial load
+  - **designed for [[3d-print-rotator]]**
 {{https://remoteqth.com/img/wiki-mast-22.jpg}}
 {{https://remoteqth.com/img/wiki-mast-23.jpg?450}}{{https://remoteqth.com/img/wiki-mast-24.jpg?450}}
-{{https://remoteqth.com/img/wiki-mast-preview.png?900}} \\
+{{https://remoteqth.com/img/wiki-mast-preview.png}} \\
-{{https://remoteqth.com/img/wiki-3d-rot1-54.jpg?430}} {{https://remoteqth.com/img/wiki-3d-rot1-55.jpg?300}}
+{{https://remoteqth.com/img/wiki-3d-rot1-54.jpg?350}} {{https://remoteqth.com/img/wiki-mast-25.jpg?350}} {{https://remoteqth.com/img/wiki-3d-rot1-55.jpg?198}}
-===== BOM =====
+===== BOM (without screws) =====
+----
 ==== Source CAD ====
-**[[https://github.com/ok1hra/Rotating-mast|GitHub]]** (OpenScad, .STL, .3MF, .DXF)
+**[[https://github.com/ok1hra/Rotating-mast|GitHub]]** (OpenScad, .STL, .3MF, .DXF) \\
+**[[https://www.printables.com/cs/model/953654-rotating-antenna-mast|Printables]]** mirror
 ----