Differences

This shows you the differences between two versions of the page.

--- usb_rotator_interface_4 [2022/02/05 18:24] – [Some tips] ok1hra
+++ usb_rotator_interface_4 [2022/02/17 22:23] (current) – [Connect Azimuth cw/ccw pulse] ok1hra
@@ Line 216: / Line 216: @@
   - **P5 jumper switch to enable.**
   - Input must grounded to **digital GND**.
-  - Next step test with [[usb_rotator_interface_4#install_test_firmware|test firmware]].\\
+  - Next step test with [[usb_rotator_interface_4#install_test_firmware|test firmware]].
+  - Note: [[https://remoteqth.com/w/doku.php?id=usb_rotator_interface_4#firmware|K3NG firmware]] use only pin12. \\
 ----