Differences

This shows you the differences between two versions of the page.

--- 3d_print_aprs_wx_station [2023/09/15 20:10] – [Measures values] ok1hra
+++ 3d_print_aprs_wx_station [2024/01/27 02:16] (current) – [Source] ok1hra
@@ Line 1: / Line 1: @@
 ====== 3D print APRS WX station (release 2023) ======
-{{ https://remoteqth.com/img/wiki-wx-station2-78.jpg?300}}
+{{ youtube>BqMSKUO8yKU}}
 Ethernet PoE weather station
   * **[[https://remoteqth.com/order.php#wx|Order]]**
   * [[https://remoteqth.com/3d-wx-station.php|Previous version web]]
   * [[https://remoteqth.com/w/doku.php?id=3d_print_wx_station_obsolete|Previous version wiki]]
 ===== Source ======
@@ Line 14: / Line 13: @@
     * **[[https://github.com/ok1hra/3D-print-WX-station/tree/master/3d-print/stl-output|.STL and .3mf files]]**
     * **[[https://remoteqth.com/download-count.php?Down=hw/SimpleRotatorInterfaceV-POE.stl|.STL for POE]]** injector
+    * **[[https://www.printables.com/cs/model/714314-aprs-weather-station|Printables mirror]]**
   * **Electronics**
     * [[https://remoteqth.com/download-count.php?Down=hw/wx-08b.pdf|.PDF]] schematics rev 8.
@@ Line 19: / Line 19: @@
   * Optional **e-ink display**
     * [[https://github.com/ok1hra/esp32-e-ink|GitHub]]
+\\
+**Instaled stations** - [[https://aprs.fi/weather/a/OK1HRA-8|OK1HRA-8]] | [[https://aprs.fi/weather/a/OK1IRG-6|OK1IRG-6]] | [[https://aprs.fi/weather/a/OK1MKH-8|OK1MKH-8]]\\
+\\
 ----
-{{ youtube>BqMSKUO8yKU}}
-===== Measures values ======
-  - **Temperature** (inside not exactly), external in sunshield
-  - **Relative humidity**
-  - **Dew point** calculated
-  - **Pressure**
-  - **Wind speed** - with three blades
-  - **Wind direction**
-  - **Rain** with a resolution of 0.14 mm
 ===== Features ======
+{{https://remoteqth.com/img/wiki-wx-station2-complete3.jpg}} \\
+{{ https://remoteqth.com/img/wiki-wx-station2-78.jpg?300}}
+  - Measures values
+    - **Temperature** (inside not exactly), external in sunshield
+    - **Relative humidity**
+    - **Dew point** calculated
+    - **Pressure**
+    - **Wind speed** - with three blades
+    - **Wind direction**
+    - **Rain** with a resolution of 0.14 mm
   - **Ethernet** RJ45 connection
   - Powered via passive **POE** with own adapter
@@ Line 64: / Line 67: @@
 ===== BOM =====
 ==== 3D printed parts ====
-Download links in the [[#source]] section.
+Download links in the [[#source]] section. \\
+You can use **3D printing to order,** for example at **[[https://mirex3d.cz/kontakty/|mirex3d.cz]]** - don't forget to specify the diameter of the mounting pipe.
 | {{https://remoteqth.com/img/wiki-wx-station2-20.png?100}} | **[[3d_print_wx_station#source|Printed parts]]** \\ **200g White PETG** filament \\ White due to reduced overheating from the sun light \\ \\ **Part number 2** is exported for a **42mm diameter mounting tube.** If you need a different diameter, [[https://github.com/ok1hra/3D-print-WX-station/blob/master/3d-print/wx-station.scad#L25|change the value]] in the source code, then [[https://github.com/ok1hra/3D-print-WX-station/blob/master/3d-print/wx-station.scad#L22|change the part to number 2]]. Open the file in [[https://openscad.org/downloads.html|OpenScad]], and follow the [[https://github.com/ok1hra/3D-print-WX-station/blob/master/3d-print/wx-station.scad#L8|instructions]]. \\ \\ //After printing, remove the supports and remove the strings using hot air// | 4 pieces |
 | {{https://remoteqth.com/img/wiki-wx-station2-21.png?100}} | **[[3d_print_wx_station#source|Printed parts]]** \\ **250g Black PETG** filament \\ Black due to the absorption of sunlight, it melts the winter ice as soon as possible \\ **Number 14** is an optional stand for the chair \\ **Number 16** is a necessary part for pressing the bearings \\ **Number 17** is optionally scaled internal parts of the bearings to find the optimal tolerance, if necessary \\ **Number 18** part for formatting bearings  \\ \\ //After printing, remove the supports and remove the strings using hot air// | 13 pieces |
@@ Line 141: / Line 145: @@
   - The POE module is mounted in a 3d printed part made of transparent material so that the LED diode inside can be seen, which signals the interruption of the tube fuse in the power supply of the weather station. **Insert the PCB** joint into the 3d printed box according to the picture. \\ {{https://remoteqth.com/img/wiki-wx-station2-90.jpg?250}} \\
   - Then close and **screw with a two M3** x 10mm screws \\ {{https://remoteqth.com/img/wiki-wx-station2-91.jpg?250}} \\
+  - You can optionally continue
+    - Connect **[[double_sun_shield_for_thermometer|External thermometer]] DS18B20**
+    - **[[https://github.com/ok1hra/esp32-e-ink|WiFi e-ink display]]**
 ----
@@ Line 202: / Line 209: @@
     - **BMP280** - sensor values (pressure in square brackets converted to sea level)
     - **DS18B20** - sensor value
-  - Menu \\ //Used to set the necessary values. Press the letter from the left column to call up the required menu//
+  - SETTINGS \\ //Used to set the necessary values. Press the letter from the left column to call up the required menu//
 ----
@@ Line 216: / Line 223: @@
   - **MQTT wall** - client connected to MQTT broker that displays received values every 5 minutes \\ {{https://remoteqth.com/img/wiki-wx-station2-mqtt.png?150}}
   - The page header displays basic information and important links
-    - **APRS** (if active) - link to the APRS map, where you can view the annual history of values, link to view the WX chart \\ {{https://remoteqth.com/img/wiki-wx-station2-aprs.png?150}} {{https://remoteqth.com/img/wiki-wx-station2-aprs2.png?150}}
+    - **APRS** (if active) - link to the [[https://aprs.fi|APRS map]], where you can view the annual history of values, link to view the WX chart \\ {{https://remoteqth.com/img/wiki-wx-station2-aprs.png?150}} {{https://remoteqth.com/img/wiki-wx-station2-aprs2.png?150}}
     - **Upload FW** - a link to the web interface of the weather station intended for updating the firmware, by uploading a .bin file \\ {{https://remoteqth.com/img/wiki-wx-station2-ota.png?150}}
-    - **Releases** - link to GitHub for downloading the latest version of the firmware in .bin format
+    - **Releases** - link to [[https://github.com/ok1hra/3D-print-WX-station/releases|GitHub]] for downloading the latest version of the firmware in .bin format
     - **html preview** - a simple page showing values for the last 5 min cycle \\ {{https://remoteqth.com/img/wiki-wx-station2-wx.png?150}}