Both sides previous revisionPrevious revisionNext revision | Previous revision |
3d_print_aprs_wx_station [2023/09/16 08:48] – [Assembly manual, step by step] ok1hra | 3d_print_aprs_wx_station [2024/01/27 02:16] (current) – [Source] ok1hra |
---|
====== 3D print APRS WX station (release 2023) ====== | ====== 3D print APRS WX station (release 2023) ====== |
{{ https://remoteqth.com/img/wiki-wx-station2-78.jpg?300}} | {{ youtube>BqMSKUO8yKU}} |
Ethernet PoE weather station | Ethernet PoE weather station |
* **[[https://remoteqth.com/order.php#wx|Order]]** | * **[[https://remoteqth.com/order.php#wx|Order]]** |
* [[https://remoteqth.com/3d-wx-station.php|Previous version web]] | * [[https://remoteqth.com/3d-wx-station.php|Previous version web]] |
* [[https://remoteqth.com/w/doku.php?id=3d_print_wx_station_obsolete|Previous version wiki]] | * [[https://remoteqth.com/w/doku.php?id=3d_print_wx_station_obsolete|Previous version wiki]] |
| |
| |
===== Source ====== | ===== Source ====== |
* **[[https://github.com/ok1hra/3D-print-WX-station/tree/master/3d-print/stl-output|.STL and .3mf files]]** | * **[[https://github.com/ok1hra/3D-print-WX-station/tree/master/3d-print/stl-output|.STL and .3mf files]]** |
* **[[https://remoteqth.com/download-count.php?Down=hw/SimpleRotatorInterfaceV-POE.stl|.STL for POE]]** injector | * **[[https://remoteqth.com/download-count.php?Down=hw/SimpleRotatorInterfaceV-POE.stl|.STL for POE]]** injector |
| * **[[https://www.printables.com/cs/model/714314-aprs-weather-station|Printables mirror]]** |
* **Electronics** | * **Electronics** |
* [[https://remoteqth.com/download-count.php?Down=hw/wx-08b.pdf|.PDF]] schematics rev 8. | * [[https://remoteqth.com/download-count.php?Down=hw/wx-08b.pdf|.PDF]] schematics rev 8. |
* Optional **e-ink display** | * Optional **e-ink display** |
* [[https://github.com/ok1hra/esp32-e-ink|GitHub]] | * [[https://github.com/ok1hra/esp32-e-ink|GitHub]] |
| \\ |
| **Instaled stations** - [[https://aprs.fi/weather/a/OK1HRA-8|OK1HRA-8]] | [[https://aprs.fi/weather/a/OK1IRG-6|OK1IRG-6]] | [[https://aprs.fi/weather/a/OK1MKH-8|OK1MKH-8]]\\ |
| \\ |
| |
---- | ---- |
| |
{{ youtube>BqMSKUO8yKU}} | |
===== Measures values ====== | |
- **Temperature** (inside not exactly), external in sunshield | |
- **Relative humidity** | |
- **Dew point** calculated | |
- **Pressure** | |
- **Wind speed** - with three blades | |
- **Wind direction** | |
- **Rain** with a resolution of 0.14 mm | |
| |
===== Features ====== | ===== Features ====== |
| {{https://remoteqth.com/img/wiki-wx-station2-complete3.jpg}} \\ |
| {{ https://remoteqth.com/img/wiki-wx-station2-78.jpg?300}} |
| - Measures values |
| - **Temperature** (inside not exactly), external in sunshield |
| - **Relative humidity** |
| - **Dew point** calculated |
| - **Pressure** |
| - **Wind speed** - with three blades |
| - **Wind direction** |
| - **Rain** with a resolution of 0.14 mm |
- **Ethernet** RJ45 connection | - **Ethernet** RJ45 connection |
- Powered via passive **POE** with own adapter | - Powered via passive **POE** with own adapter |
===== BOM ===== | ===== BOM ===== |
==== 3D printed parts ==== | ==== 3D printed parts ==== |
Download links in the [[#source]] section. | Download links in the [[#source]] section. \\ |
| You can use **3D printing to order,** for example at **[[https://mirex3d.cz/kontakty/|mirex3d.cz]]** - don't forget to specify the diameter of the mounting pipe. |
| {{https://remoteqth.com/img/wiki-wx-station2-20.png?100}} | **[[3d_print_wx_station#source|Printed parts]]** \\ **200g White PETG** filament \\ White due to reduced overheating from the sun light \\ \\ **Part number 2** is exported for a **42mm diameter mounting tube.** If you need a different diameter, [[https://github.com/ok1hra/3D-print-WX-station/blob/master/3d-print/wx-station.scad#L25|change the value]] in the source code, then [[https://github.com/ok1hra/3D-print-WX-station/blob/master/3d-print/wx-station.scad#L22|change the part to number 2]]. Open the file in [[https://openscad.org/downloads.html|OpenScad]], and follow the [[https://github.com/ok1hra/3D-print-WX-station/blob/master/3d-print/wx-station.scad#L8|instructions]]. \\ \\ //After printing, remove the supports and remove the strings using hot air// | 4 pieces | | | {{https://remoteqth.com/img/wiki-wx-station2-20.png?100}} | **[[3d_print_wx_station#source|Printed parts]]** \\ **200g White PETG** filament \\ White due to reduced overheating from the sun light \\ \\ **Part number 2** is exported for a **42mm diameter mounting tube.** If you need a different diameter, [[https://github.com/ok1hra/3D-print-WX-station/blob/master/3d-print/wx-station.scad#L25|change the value]] in the source code, then [[https://github.com/ok1hra/3D-print-WX-station/blob/master/3d-print/wx-station.scad#L22|change the part to number 2]]. Open the file in [[https://openscad.org/downloads.html|OpenScad]], and follow the [[https://github.com/ok1hra/3D-print-WX-station/blob/master/3d-print/wx-station.scad#L8|instructions]]. \\ \\ //After printing, remove the supports and remove the strings using hot air// | 4 pieces | |
| {{https://remoteqth.com/img/wiki-wx-station2-21.png?100}} | **[[3d_print_wx_station#source|Printed parts]]** \\ **250g Black PETG** filament \\ Black due to the absorption of sunlight, it melts the winter ice as soon as possible \\ **Number 14** is an optional stand for the chair \\ **Number 16** is a necessary part for pressing the bearings \\ **Number 17** is optionally scaled internal parts of the bearings to find the optimal tolerance, if necessary \\ **Number 18** part for formatting bearings \\ \\ //After printing, remove the supports and remove the strings using hot air// | 13 pieces | | | {{https://remoteqth.com/img/wiki-wx-station2-21.png?100}} | **[[3d_print_wx_station#source|Printed parts]]** \\ **250g Black PETG** filament \\ Black due to the absorption of sunlight, it melts the winter ice as soon as possible \\ **Number 14** is an optional stand for the chair \\ **Number 16** is a necessary part for pressing the bearings \\ **Number 17** is optionally scaled internal parts of the bearings to find the optimal tolerance, if necessary \\ **Number 18** part for formatting bearings \\ \\ //After printing, remove the supports and remove the strings using hot air// | 13 pieces | |
- **BMP280** - sensor values (pressure in square brackets converted to sea level) | - **BMP280** - sensor values (pressure in square brackets converted to sea level) |
- **DS18B20** - sensor value | - **DS18B20** - sensor value |
- Menu \\ //Used to set the necessary values. Press the letter from the left column to call up the required menu// | - SETTINGS \\ //Used to set the necessary values. Press the letter from the left column to call up the required menu// |
| |
---- | ---- |
- **MQTT wall** - client connected to MQTT broker that displays received values every 5 minutes \\ {{https://remoteqth.com/img/wiki-wx-station2-mqtt.png?150}} | - **MQTT wall** - client connected to MQTT broker that displays received values every 5 minutes \\ {{https://remoteqth.com/img/wiki-wx-station2-mqtt.png?150}} |
- The page header displays basic information and important links | - The page header displays basic information and important links |
- **APRS** (if active) - link to the APRS map, where you can view the annual history of values, link to view the WX chart \\ {{https://remoteqth.com/img/wiki-wx-station2-aprs.png?150}} {{https://remoteqth.com/img/wiki-wx-station2-aprs2.png?150}} | - **APRS** (if active) - link to the [[https://aprs.fi|APRS map]], where you can view the annual history of values, link to view the WX chart \\ {{https://remoteqth.com/img/wiki-wx-station2-aprs.png?150}} {{https://remoteqth.com/img/wiki-wx-station2-aprs2.png?150}} |
- **Upload FW** - a link to the web interface of the weather station intended for updating the firmware, by uploading a .bin file \\ {{https://remoteqth.com/img/wiki-wx-station2-ota.png?150}} | - **Upload FW** - a link to the web interface of the weather station intended for updating the firmware, by uploading a .bin file \\ {{https://remoteqth.com/img/wiki-wx-station2-ota.png?150}} |
- **Releases** - link to GitHub for downloading the latest version of the firmware in .bin format | - **Releases** - link to [[https://github.com/ok1hra/3D-print-WX-station/releases|GitHub]] for downloading the latest version of the firmware in .bin format |
- **html preview** - a simple page showing values for the last 5 min cycle \\ {{https://remoteqth.com/img/wiki-wx-station2-wx.png?150}} | - **html preview** - a simple page showing values for the last 5 min cycle \\ {{https://remoteqth.com/img/wiki-wx-station2-wx.png?150}} |
| |