Differences

This shows you the differences between two versions of the page.

--- 3d_print_aprs_wx_station [2023/09/16 09:15] – [3D printed parts] ok1hra
+++ 3d_print_aprs_wx_station [2024/01/27 02:16] (current) – [Source] ok1hra
@@ Line 1: / Line 1: @@
 ====== 3D print APRS WX station (release 2023) ======
-{{ https://remoteqth.com/img/wiki-wx-station2-78.jpg?300}}
+{{ youtube>BqMSKUO8yKU}}
 Ethernet PoE weather station
   * **[[https://remoteqth.com/order.php#wx|Order]]**
   * [[https://remoteqth.com/3d-wx-station.php|Previous version web]]
   * [[https://remoteqth.com/w/doku.php?id=3d_print_wx_station_obsolete|Previous version wiki]]
 ===== Source ======
@@ Line 14: / Line 13: @@
     * **[[https://github.com/ok1hra/3D-print-WX-station/tree/master/3d-print/stl-output|.STL and .3mf files]]**
     * **[[https://remoteqth.com/download-count.php?Down=hw/SimpleRotatorInterfaceV-POE.stl|.STL for POE]]** injector
+    * **[[https://www.printables.com/cs/model/714314-aprs-weather-station|Printables mirror]]**
   * **Electronics**
     * [[https://remoteqth.com/download-count.php?Down=hw/wx-08b.pdf|.PDF]] schematics rev 8.
@@ Line 19: / Line 19: @@
   * Optional **e-ink display**
     * [[https://github.com/ok1hra/esp32-e-ink|GitHub]]
+\\
+**Instaled stations** - [[https://aprs.fi/weather/a/OK1HRA-8|OK1HRA-8]] | [[https://aprs.fi/weather/a/OK1IRG-6|OK1IRG-6]] | [[https://aprs.fi/weather/a/OK1MKH-8|OK1MKH-8]]\\
+\\
 ----
-{{ youtube>BqMSKUO8yKU}}
-===== Measures values ======
-  - **Temperature** (inside not exactly), external in sunshield
-  - **Relative humidity**
-  - **Dew point** calculated
-  - **Pressure**
-  - **Wind speed** - with three blades
-  - **Wind direction**
-  - **Rain** with a resolution of 0.14 mm
 ===== Features ======
+{{https://remoteqth.com/img/wiki-wx-station2-complete3.jpg}} \\
+{{ https://remoteqth.com/img/wiki-wx-station2-78.jpg?300}}
+  - Measures values
+    - **Temperature** (inside not exactly), external in sunshield
+    - **Relative humidity**
+    - **Dew point** calculated
+    - **Pressure**
+    - **Wind speed** - with three blades
+    - **Wind direction**
+    - **Rain** with a resolution of 0.14 mm
   - **Ethernet** RJ45 connection
   - Powered via passive **POE** with own adapter
@@ Line 64: / Line 67: @@
 ===== BOM =====
 ==== 3D printed parts ====
-Download links in the [[#source]] section.
+Download links in the [[#source]] section. \\
 You can use **3D printing to order,** for example at **[[https://mirex3d.cz/kontakty/|mirex3d.cz]]** - don't forget to specify the diameter of the mounting pipe.
 | {{https://remoteqth.com/img/wiki-wx-station2-20.png?100}} | **[[3d_print_wx_station#source|Printed parts]]** \\ **200g White PETG** filament \\ White due to reduced overheating from the sun light \\ \\ **Part number 2** is exported for a **42mm diameter mounting tube.** If you need a different diameter, [[https://github.com/ok1hra/3D-print-WX-station/blob/master/3d-print/wx-station.scad#L25|change the value]] in the source code, then [[https://github.com/ok1hra/3D-print-WX-station/blob/master/3d-print/wx-station.scad#L22|change the part to number 2]]. Open the file in [[https://openscad.org/downloads.html|OpenScad]], and follow the [[https://github.com/ok1hra/3D-print-WX-station/blob/master/3d-print/wx-station.scad#L8|instructions]]. \\ \\ //After printing, remove the supports and remove the strings using hot air// | 4 pieces |
@@ Line 206: / Line 209: @@
     - **BMP280** - sensor values (pressure in square brackets converted to sea level)
     - **DS18B20** - sensor value
-  - Menu \\ //Used to set the necessary values. Press the letter from the left column to call up the required menu//
+  - SETTINGS \\ //Used to set the necessary values. Press the letter from the left column to call up the required menu//
 ----
@@ Line 220: / Line 223: @@
   - **MQTT wall** - client connected to MQTT broker that displays received values every 5 minutes \\ {{https://remoteqth.com/img/wiki-wx-station2-mqtt.png?150}}
   - The page header displays basic information and important links
-    - **APRS** (if active) - link to the APRS map, where you can view the annual history of values, link to view the WX chart \\ {{https://remoteqth.com/img/wiki-wx-station2-aprs.png?150}} {{https://remoteqth.com/img/wiki-wx-station2-aprs2.png?150}}
+    - **APRS** (if active) - link to the [[https://aprs.fi|APRS map]], where you can view the annual history of values, link to view the WX chart \\ {{https://remoteqth.com/img/wiki-wx-station2-aprs.png?150}} {{https://remoteqth.com/img/wiki-wx-station2-aprs2.png?150}}
     - **Upload FW** - a link to the web interface of the weather station intended for updating the firmware, by uploading a .bin file \\ {{https://remoteqth.com/img/wiki-wx-station2-ota.png?150}}
-    - **Releases** - link to GitHub for downloading the latest version of the firmware in .bin format
+    - **Releases** - link to [[https://github.com/ok1hra/3D-print-WX-station/releases|GitHub]] for downloading the latest version of the firmware in .bin format
     - **html preview** - a simple page showing values for the last 5 min cycle \\ {{https://remoteqth.com/img/wiki-wx-station2-wx.png?150}}