User Tools

Site Tools


rx-splitter

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
rx-splitter [2020/12/29 23:37]
ok1hra
rx-splitter [2020/12/30 10:03] (current)
ok1hra
Line 1: Line 1:
 ====== RX splitter ====== ====== RX splitter ======
 ---- ----
 +{{https://remoteqth.com/img/wiki-rx-splitter-0.3-02.jpg?800}} \\
 +{{https://remoteqth.com/img/wiki-rx-splitter-0.3-03.jpg?440}}
 +{{https://remoteqth.com/img/wiki-rx-splitter-0.3-05.jpg?360}}
  
  
-  * Split RX antenna to TRX and SDR +{{ https://remoteqth.com/img/wiki-rx-splitter-0.3-04.jpg?200}} 
-  * Safe TRX, if turn off, TRX and SDR is grounded + 
-  * Bypass to VNA - ground if not use +  * **Split RX** antenna to **TRX** and **SDR** 
-  * DC bias current for eliminate relay resistance, indicated with LED +  * **Safe TRX,** if turn off, TRX and SDR is grounded 
-  * 12V DC power spply +  * Bypass to **VNA** - ground if not use 
-  * 3D print case for mount to DIN rail+  * **DC bias** current for eliminate relay resistance, indicated with LED 
 +  * **12V DC power** spply 
 +  * **3D print case** for mount to DIN rail
  
 ---- ----
Line 16: Line 21:
   * [[https://remoteqth.com/hw/rx-splitter-0.3.step|.STEP 3D model]]   * [[https://remoteqth.com/hw/rx-splitter-0.3.step|.STEP 3D model]]
   * [[https://remoteqth.com/download-count.php?Down=hw/rx-splitter-0.3.zip|.zip KiCad source code]]   * [[https://remoteqth.com/download-count.php?Down=hw/rx-splitter-0.3.zip|.zip KiCad source code]]
-  * [[https://remoteqth.com/3d/ethernet-splitter-din-46mm.stl|.stl DIN rail mount 3D model for printer]] +  * [[https://remoteqth.com/3d/rx-splitter-03.zip|.zip 3D model source and .stl for case]]
 \\ \\
 +{{https://remoteqth.com/img/wiki-rx-splitter-0.3.png?305}} 
 +{{https://remoteqth.com/img/wiki-rx-splitter-0.3-01.png?400}}
  
  
  
  
rx-splitter.1609281475.txt.gz · Last modified: 2020/12/29 23:37 by ok1hra