Differences

This shows you the differences between two versions of the page.

--- double_sun_shield_for_thermometer [2023/09/08 09:23] – [Connected to a 3D printed weather station] ok1hra
+++ double_sun_shield_for_thermometer [2024/01/09 21:53] (current) – [3D print Double sun shield for thermometer DS18B20] ok1hra
@@ Line 1: / Line 1: @@
 ====== 3D print Double sun shield for thermometer DS18B20 ======
+{{ https://remoteqth.com/img/wiki-wx-station2-00.png?400}}
 D printed shield, against overheating of the thermometer in direct sunlight. \\
-**The doubling of the shield makes it possible to better shield the salve heat from the heated outer shield.
+**The doubling of the shield makes it possible to better shield the salve heat from the heated outer shield.**
-**
-[[https://github.com/ok1hra/3D-print-WX-station/tree/master/3d-print|Source files on GitHub]]\\
+**[[https://github.com/ok1hra/3D-print-WX-station/tree/master/3d-print|Source files on GitHub]]** \\
+**[[https://www.printables.com/cs/model/714305-double-radiation-sun-shield-for-thermometer-ds18b2|Printables mirror]]** \\
   * I include the source file **sun-shield.scad** in OpenScad
   * **exported .STL** files for individual parts (preset for mounting rods with a diameter of 42 mm)
   * **preset .3mf** files
-\\
+----
 ===== BOM =====
-| {{https://remoteqth.com/img/wiki-wx-station2-01.png?100}} | Printed parts \\ Prefered white PETG filament \\ **Part number 4 is printed four times** | 8 pieces |
+You can use **3D printing to order,** for example at **[[https://mirex3d.cz/kontakty/|mirex3d.cz]]** - don't forget to specify the diameter of the mounting pipe.
+| {{https://remoteqth.com/img/wiki-wx-station2-01.png?100}} | Printed parts \\ **450g white PETG** filament \\ **Part number 4 is printed four times** | 8 pieces |
 | {{https://remoteqth.com/img/wiki-3d-rot1-57.jpg?100}} | M3 x 10mm, allen head, stainless steel | 21 pieces |
 | {{https://remoteqth.com/img/wiki-wx-station2-03.jpg?100}} | Thermometer DS18B20 with a minimum meter long supply wire | 1 pieces |
@@ Line 19: / Line 23: @@
 ===== Tools =====
 | {{https://remoteqth.com/img/wiki-3d-rot1-69.png?100}} | Allen key 2,5mm |
+| | Soldering station |
 ----
@@ Line 42: / Line 47: @@
   - Attach the assembled shield to the mounting pipe using two plastic binding strips \\ {{https://remoteqth.com/img/wiki-wx-station2-12.jpg?250}} {{https://remoteqth.com/img/wiki-wx-station2-13.jpg?250}} \\
-===== Connected to a 3D printed weather station =====
+----
+===== Connected to a 3D print weather station =====
+[[3D print WX station]] Wiki
   - Unscrew the brass nut, remove the grille and unscrew the second brass nut below it. \\ {{https://remoteqth.com/img/wiki-wx-station2-14.jpg?250}} \\