Differences

This shows you the differences between two versions of the page.

--- qmx-modifications-extension [2026/01/06 03:26] – ok1hra
+++ qmx-modifications-extension [2026/01/07 22:22] (current) – ok1hra
@@ Line 1: / Line 1: @@
-====== QMX+ modifications and extension (release 2026) ======
+====== QMX+ modifications and extension DRAFT (release 2026) ======
-  * The basic modification is to replace the original aluminum box with a **3D printed [[https://www.printables.com/model/1541880-qmx-waterproof-rugged-box|waterproof rugged box]]**
+QMX+ is 160-6m multi-mode transceiver from [[http://qrp-labs.com/qmxp.html|QRP Labs]]
+  * The basic modification is to replace the original aluminum box with a **3D printed [[https://www.printables.com/model/1541880-qmx-waterproof-rugged-box|Waterproof rugged box]]**
     * This modification allows you to use the **internal GPS antenna** as an extension and the **expandable bottom box** as a storage for parts needed for use in one common storage. For example, a modem, a telegraph key, an antenna, and so on.
@@ Line 15: / Line 17: @@
       * **audio amplifier** for internal speaker
     - **Rear panel** plate accessing new connectors and internal speaker mounting
+<code>If you are interested in purchasing a KIT of three boards for a preliminary price of ??EUR,
+contact the author at email (below). If there are enough interested parties for
+the first batch of 50 pieces, a selection of deposits will follow and then production.</code>
+[[mailto:ok1hra@gmail.com?subject=QMX+%20extension%20boards%20interest|OK1HRA e-mail]]
+^ Status as of January 7, 2025 ||
+| number of applicants |  0|
+| number of deposits paid |  0|